GB/T 15970.2-2000
ActiveCorrosionof metals and alloys--Stress corrosion testing--Part 2:Preparation and use of bent-beam specimens
金属和合金的腐蚀 应力腐蚀试验 第2部分:弯梁试样的制备和应用
Application Summary AI generated
This standard specifies the procedures for preparing and using bent-beam specimens to evaluate the stress corrosion cracking (SCC) susceptibility of metals and alloys. It is applied in materials testing and quality control within industries such as aerospace, automotive, and chemical processing, where components are exposed to corrosive environments under sustained tensile stress. The standard ensures consistent specimen geometry and loading methods for reliable comparison of SCC behavior across different materials and test conditions.
Related Standards
GB/T 19292.3-2003
Corrosion of metals and alloys--Corrosivity of atmospheres--Measurement of pollution
GB/T 19292.4-2003
Corrosion of metals and alloys--Corrosivity of atmospheres--Determination of corrosion rate of standard specimens for the evaluation of corrosivity
GB/T 19292.2-2003
Corrosion of metals andalloys--Corrosivity of atmospheres--Guiding values for the corrosivity categories
GB/T 19292.1-2003
Corrosion of metals and alloys--Corrosivity of atmospheres--Classification
GB/T 19291-2003
Corrosion of metals and alloys--General principles for corrosion testing
GB/T 19745-2005
Corrosion tests in artificial atmosphere at very low Concentrations of polluting gas(es)
GB/T 19746-2005
Corrosion of metals and alloys-Alternate immersion test in salt solution
GB/T 19747-2005
Corrosion of metals and alloys-Determination of bimetallic Corrosion in outdoor exposure corrosion tests
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.