GB/T 15917.3-1995
AbolishedDysprosium and dysprosium oxide--Determination of tantalum content--Para-chloride-phenylfluorone-cetyl trimethyl ammonium bromide-ethanol spectrophotometric method
金属镝及氧化镝化学分析方法 对氯苯基荧光酮-溴化十六烷基 三甲基胺分光光度法测定钽量
Application Summary AI generated
This standard specifies a spectrophotometric method for determining the tantalum content in dysprosium metal and dysprosium oxide, using para-chloride-phenylfluorone with cetyl trimethyl ammonium bromide and ethanol. It is applied in the metallurgical industry, specifically for quality control and chemical analysis of rare earth materials used in electronics, magnets, and optical devices. The method ensures precise measurement of trace tantalum impurities, which is critical for maintaining product purity and performance in high-tech applications.
Related Standards
GB/T 5153-2003
Designation and composition of wrought magnesium and magnesium alloys
GB/T 12690.13-2003
Chemical analysis methods for non-rareearth impurities of rare earth metals and their oxides--Determination of molybdenum and tungsten content--Induct-ively coupled plasma atomic emission spectrographic method and inductively coupled plasma mass spectrum
GB/T 12690.4-2003
Chemical analysis methods for non-rare earth impurities ofrare earth metals and their oxides--Determination of oxygen and nitrogen content--Impulse-infrared and impulse-thermal conductance absorption method
GB/T 12690.11-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of magnesium content--Flame atomic absorptionspectrometric method
GB/T 12690.10-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of phosphorus content by molybdenum blue spectrophotometric method
GB/T 12690.12-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of thorium content--Arsenazo III spectrophotometric method and inductively coupled plasma mass spectrum method
GB/T 12690.5-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of Al、Cr、Mn、Fe、Co、Ni、Cu、Zn、Pb content by inductively coupled plasma atomic emission spectrographic method--Determination of Co、Mn、Pb、N
GB/T 12690.6-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of iron content--Kalium thiocyanate，1，10-phenanthroline spectrophotometric method
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.