GB/T 15593-1995
AbolishedPlasticized polyvinyl chloride (PVC) compounds for transfusion (infusion) equipment
输血(液)器具用软聚氯乙烯塑料
Application Summary AI generated
This standard specifies the technical requirements, test methods, and inspection rules for plasticized polyvinyl chloride (PVC) compounds used in the manufacture of transfusion (infusion) equipment. It is applied in the medical device industry to ensure the safety and performance of PVC materials in products such as blood bags, infusion tubes, and drip chambers. The standard governs material properties like biocompatibility, mechanical strength, and chemical stability under sterilization and clinical use conditions.
Related Standards
GB/T 7141-2008
Plastics—Methods of heat aging
GB/T 9350-2003
Plastics--Homopolymer andcopolymer resins of vinyl chloride--Determination of pH of aqueous extract
GB/T 19276.1-2003
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium--Method by measuring the oxygen demand in a closed respirometer
GB/T 12004.4-2003
Polyvinyl chloride paste--Determination of apparent viscosity by the Brookfield test method
GB/T 19276.2-2003
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium--Method by analysis of evolved carbon dioxide
GB/T 19275-2003
Evaluation of the potential biodegradability and disintegration of plastic materials by the action of the specific microorganisms
GB/T 12000-2003
Determination of the effects of exposure to damp heat，water spray and salt mist for plastics
GB/T 17931-2003
Poly(ethylene terephthalate)(PET)resin for bottles
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.