GB/T 14495-2009
ActiveGeometrical Product Specifications (GPS)- Surface texture: Profile method Roughness comparison specimens for wooden pieces
产品几何技术规范(GPS) 表面结构 轮廓法 木制件表面粗糙度比较样块
Catalogue
前言 → 1 范围 → 2 规范性引用文件 → 3 术语和定义 → 4 制造方法 → 5 表面特征 Foreword → 1 Scope → 2 Normative References → 3 Terms and Definitions → 4 Manufacturing Method → 5 Surface Characteristics
Scope
This standard specifies the manufacturing method, surface characteristics, classification of specimens, surface roughness parameters, evaluation method, structural dimensions and marking of roughness comparison specimens for wooden pieces. This standard applies to roughness comparison specimens for wooden pieces processed by methods such as sanding, milling, planing, and turning. The specimens are used for comparison with surfaces having similar texture and the same processing method, to evaluate the surface roughness of wooden pieces through visual and tactile means. It can also serve as a reference basis for selecting surface roughness parameter values for wooden pieces.
本标准规定了木制件表面粗糙度比较样块的制造方法, 表面特征, 样块分类, 表面粗糙度参数, 评定方法, 结构尺寸及标记。本标准适用于砂, 铣, 刨, 车等方法加工的木制件表面粗糙度比较样块。该样块用来与同其结构纹理相近且加工方法相同的表面进行比较, 通过视觉和触觉评定木制件表面粗糙度。它还可作为木制件表面粗糙度参数值选用的参考依据。
Normative References
Keywords
Application Summary AI generated
Quality inspectors in the woodworking industry use this standard to manufacture and calibrate surface roughness comparison specimens. These specimens are used to quickly assess the roughness level of wooden surfaces through visual and tactile comparison, ensuring product surface quality meets requirements. This standard is important for unifying the evaluation method of wooden surface roughness and improving quality control levels.
木制品加工行业的质量检验人员使用这个标准来制造和校准表面粗糙度比较样块。这些样块用于通过视觉和触觉快速评估木制件表面的粗糙度等级，确保产品表面质量符合要求。该标准对于统一木制件表面粗糙度的评定方法、提高产品质量控制水平具有重要意义。
AI Summary AI generated
GB/T 14495-2009 specifies the manufacturing method, surface characteristics, classification, parameters, evaluation method, structural dimensions, and marking of roughness comparison specimens for wooden pieces. It applies to specimens processed by sanding, milling, planing, turning, etc. The specimens are used for visual and tactile comparison with workpiece surfaces to evaluate roughness, and also serve as a reference for parameter selection. This standard replaces the 1993 version, aligns technical content with the new GPS system, and adds Appendix B.
GB/T 14495-2009 规定了木制件表面粗糙度比较样块的制造方法、表面特征、分类、参数、评定方法、结构尺寸和标记。适用于砂、铣、刨、车等加工方式。样块通过视觉和触觉与工件表面比较来评定粗糙度，也可作为参数选用的参考。标准代替了1993年版，在技术内容上与新的GPS体系保持一致，并增加了附录B。
Key Sentences extracted from text
本标准规定了木制件表面粗糙度比较样块的制造方法, 表面特征, 样块分类, 表面粗糙度参数, 评定方法, 结构尺寸及标记。
该样块用来与同其结构纹理相近且加工方法相同的表面进行比较, 通过视觉和触觉评定木制件表面粗糙度。
样块表面应呈现它所要表征的特定材质和加工方法产生的表面粗糙度特征, 而不应含有表面粗糙度特征以外的其他表面特征。
用电铸法复制的表面的阳模。
用塑料或其他材料复制的表面的阴模。
This standard specifies the manufacturing method, surface characteristics, classification of specimens, surface roughness parameters, evaluation method, structural dimensions and marking of roughness comparison specimens for wooden pieces.
The specimens are used for comparison with surfaces having similar texture and the same processing method, to evaluate the surface roughness of wooden pieces through visual and tactile means.
The surface of the specimen shall present the surface roughness characteristics produced by the specific material and processing method it is intended to represent, and shall not contain other surface features beyond the surface roughness characteristics.
Positive molds of surfaces replicated by electroforming.
Negative molds of surfaces replicated using plastic or other materials.
Standard Timeline
Changes from replaced version:
- 按照 GB/T 1.1-2000 标准化工作导则第1部分:标准的结构和编写规则,作了一些编辑性修改,增加了标准的前言
- 在标准的技术内容,如:标准名称,术语和参数等方面,均与新的表面结构标准体系取得一致
- 增加了附录B
- Made some editorial modifications according to GB/T 1.1-2000 'Directives for standardization - Part 1: Structure and drafting of standards', and added a foreword
- Aligned technical content such as standard name, terms and parameters with the new surface texture standard system
- Added Appendix B