GB/T 14352.24-2022
ActiveMethods for chemical analysis of tungsten ores and molybdenum ores—Part 24: Determination of germanium conten—Inductively coupled plasma mass spectrometry
钨矿石、钼矿石化学分析方法 第24部分：锗含量的测定 电感耦合等离子体质谱法
Application Summary AI generated
This standard specifies the inductively coupled plasma mass spectrometry (ICP-MS) method for determining germanium content in tungsten and molybdenum ores. It is applied in mining and mineral processing laboratories for quality control and resource evaluation of these ores. The method ensures accurate quantification of trace germanium, which is critical for assessing ore value and optimizing extraction processes.
Related Standards
GB/T 1819.11-2004
Methods for chemical analysis of tin concentrates--Determination of aluminum oxide content--The chromazuzol S spectrophotometric method
GB/T 1819.1-2004
Methods for chemical analysisof tin concentrates--Determination of water content--The weighing method
GB/T 1819.10-2004
Methods for chemical analysis of tin concentrates--Determination of sulphur content--The high frequency infrared absorption method and the combustion potassium iodate titrimetric method
GB/T 1819.5-2004
Methods for chemical analysis of tin concentrates--Determination of arsenic content--The molybdoantimonyarsenate blue spectrophotometric method and the distillation-iodimetric titrimetric method
GB/T 1819.7-2004
Methods for chemical analysis of tin concentrates--Determination of bismuth content--Flame atomicabsorption spectrometric method
GB/T 1819.3-2004
Methods for chemical analysis of tin concentrates--Determination of iron content--The cerium sulfate titrimetric method
GB/T 1819.12-2004
Methods for chemical analysis of tin concentrates--Determination of silicon dioxide content--The silicomolybdenum blue spectrophotometric method
GB/T 1819.13-2004
Methodsfor chemical analysis of tin concentrates--Determination of magnesium oxide andcalcium oxide contents--Flame atomic absorption spectrometric method
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.