GB/T 13823.14-1995
ActiveMethods for the calibration of vibration and shock pick-ups--Primary calibration by centrifuge
振动与冲击传感器的校准方法 离心机法一次校准
Application Summary AI generated
This standard specifies a primary calibration method for vibration and shock pick-ups using a centrifuge to generate known acceleration levels. It is applied in metrology laboratories and testing facilities to establish traceable sensitivity values for accelerometers used in dynamic measurements. The method is particularly relevant for calibrating sensors in aerospace, automotive, and industrial vibration testing contexts.
Related Standards
GB/T 8910.2-2004
Hand-held portable power tools--Measurement of vibrations at the handle Part 2:Chippinghammers and riveting hammers
GB/T 8910.1-2004
Hand-held portablepower tools--Measurement of vibrations at the handle--Part 1:General
GB/T 8910.3-2004
Hand-held portable power tools--Measurement of vibrations at the handle--Part 3:Rock drills and rotary hammers
GB/T 19740-2005
Mechanical vibration and shock-Free,Mechanical impedance of the human hand-arm system at the driving point
GB/T 15619-2005
Mechanical vibration and shock-Human exposure-Vocabulary
GB/T 19739-2005
Mechanical vibration and shock-Hand-arm vibration-Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system
GB/T 18707.1-2002
Mechanical vibration--Laboratory method for evaluating vehicle seat vibration--Part 1:Basic requirements
GB/T 18703-2002
Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.