GB/T 13322-1991
ActiveMetallic coating--Cd-Ti plating of low hydrogan embrittlement
金属覆盖层 低氢脆镉钛电镀层
Application Summary AI generated
This standard specifies the technical requirements and test methods for cadmium-titanium (Cd-Ti) electroplated coatings designed to minimize hydrogen embrittlement in high-strength steel components. It is primarily applied in the aerospace, automotive, and defense industries for critical fasteners, landing gear parts, and other load-bearing steel parts that are susceptible to hydrogen-induced cracking during plating or service. The standard ensures that the coating process and final deposit properties maintain the mechanical integrity of the substrate under stress.
Related Standards
GB/T 19356-2003
Thermal spraying--Powders--Composition and technical supply conditions
GB/T 9792-2003
Conversion coatings on metallic materials--Determination of coating mass per unit area--Gravimetric methods
GB/T 4956-2003
Non-magnetic coatings on magnetic substrates--Measurement of coating thickness--Magnetic method
GB/T 9791-2003
Chromate conversion coatings on zinc，cadmium，aluminium-zinc alloys and zinc-aluminium alloys--Test methods
GB/T 19353-2003
Vitreous and porcelain enamels--Corrosion tests in closed systems
GB/T 4957-2003
Non-conductive coatings on non-magnetic basis metals--Measurement of coating thickness--Eddy current
GB/T 19354-2003
Vitreous and porcelain enamels for aluminium--Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)
GB/T 19355-2003
Protection against corrosion ofiron and steel in structures--Zinc and aluminum coatings--Guidelines
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.