GB/T 13241-1991
AbolishedIron ores--Determination of reducibility
铁矿石 还原性的测定方法
Application Summary AI generated
This standard specifies the method for determining the reducibility of iron ores, measuring the ease with which oxygen is removed from the ore under controlled reducing conditions. It is applied in the mining and metallurgical industries for quality assessment of lump ores, sinters, and pellets used in blast furnace ironmaking. The test simulates the reduction process in a blast furnace to evaluate raw material performance for efficient smelting.
Related Standards
GB/T 1819.5-2004
Methods for chemical analysis of tin concentrates--Determination of arsenic content--The molybdoantimonyarsenate blue spectrophotometric method and the distillation-iodimetric titrimetric method
GB/T 1819.7-2004
Methods for chemical analysis of tin concentrates--Determination of bismuth content--Flame atomicabsorption spectrometric method
GB/T 1819.4-2004
Methodsfor chemical analysis of tin concentrates--Determination of lead content--Flameatomic absorption spectrometric method and EDTA titrimetric method
GB/T 1819.13-2004
Methodsfor chemical analysis of tin concentrates--Determination of magnesium oxide andcalcium oxide contents--Flame atomic absorption spectrometric method
GB/T 1819.2-2004
Methods for chemical analysis of tin concentrates--Determination of tin content--The potassium iodate titrimetric method
GB/T 1819.3-2004
Methods for chemical analysis of tin concentrates--Determination of iron content--The cerium sulfate titrimetric method
GB/T 1819.12-2004
Methods for chemical analysis of tin concentrates--Determination of silicon dioxide content--The silicomolybdenum blue spectrophotometric method
GB/T 1819.8-2004
Methods for chemical analysis of tin concentrates--Determination of zinc content--Flame atomic absorption spectrometric method
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.