GB/T 12967.1-2008
AbolishedTest Methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 1：Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test Apparatus
铝及铝合金阳极氧化膜检测方法 第1部分：用喷磨试验仪测定阳极氧化膜的平均耐磨性
Application Summary AI generated
This standard specifies a test method for measuring the mean specific abrasion resistance of anodic oxidation coatings on aluminium and aluminium alloys using an abrasive jet test apparatus. It is applied in quality control and material testing within the manufacturing and surface treatment industries, particularly for evaluating the durability of anodized components used in automotive, aerospace, and architectural applications. The method provides a standardized procedure to simulate wear from airborne particles or abrasive contact, ensuring consistent performance assessment across production batches.
Related Standards
GB/T 4957-2003
Non-conductive coatings on non-magnetic basis metals--Measurement of coating thickness--Eddy current
GB/T 19354-2003
Vitreous and porcelain enamels for aluminium--Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)
GB/T 9791-2003
Chromate conversion coatings on zinc，cadmium，aluminium-zinc alloys and zinc-aluminium alloys--Test methods
GB/T 19353-2003
Vitreous and porcelain enamels--Corrosion tests in closed systems
GB/T 4956-2003
Non-magnetic coatings on magnetic substrates--Measurement of coating thickness--Magnetic method
GB/T 19355-2003
Protection against corrosion ofiron and steel in structures--Zinc and aluminum coatings--Guidelines
GB/T 19356-2003
Thermal spraying--Powders--Composition and technical supply conditions
GB/T 9792-2003
Conversion coatings on metallic materials--Determination of coating mass per unit area--Gravimetric methods
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.