GB/T 12611-2008
ActiveTechnical requirements of quality control for metal parts to be coated
金属零（部）件镀覆前质量控制技术要求
Application Summary AI generated
This standard specifies the technical requirements for controlling the quality of metal parts prior to coating processes such as electroplating, painting, or chemical conversion. It is applied in manufacturing industries to ensure that metal components are free from surface defects, contaminants, or improper preparation that could compromise coating adhesion and corrosion resistance. The standard is used by quality control and production teams in sectors like automotive, aerospace, and general metal fabrication.
Related Standards
GB/T 9792-2003
Conversion coatings on metallic materials--Determination of coating mass per unit area--Gravimetric methods
GB/T 19356-2003
Thermal spraying--Powders--Composition and technical supply conditions
GB/T 4957-2003
Non-conductive coatings on non-magnetic basis metals--Measurement of coating thickness--Eddy current
GB/T 4956-2003
Non-magnetic coatings on magnetic substrates--Measurement of coating thickness--Magnetic method
GB/T 9791-2003
Chromate conversion coatings on zinc，cadmium，aluminium-zinc alloys and zinc-aluminium alloys--Test methods
GB/T 19354-2003
Vitreous and porcelain enamels for aluminium--Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)
GB/T 19353-2003
Vitreous and porcelain enamels--Corrosion tests in closed systems
GB/T 19355-2003
Protection against corrosion ofiron and steel in structures--Zinc and aluminum coatings--Guidelines
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.