GB/T 12307.3-1997
AbolishedMetalliccoatings--Test methods for electrodeposited silver and silver alloy coatings--Part 3:Determination of the presence of residual salts
金属覆盖层 银和银合金电镀层的试验方法 第三部分:残留盐的测定
Application Summary AI generated
This standard specifies a test method for detecting residual salts on electrodeposited silver and silver alloy coatings. It is applied in manufacturing and quality control contexts to ensure that post-plating rinsing processes have adequately removed conductive or corrosive salt residues, which could compromise coating performance or cause corrosion. The method is used by laboratories and production facilities to verify the cleanliness of silver-plated components for electronics, connectors, or decorative hardware.
Related Standards
GB/T 9791-2003
Chromate conversion coatings on zinc，cadmium，aluminium-zinc alloys and zinc-aluminium alloys--Test methods
GB/T 19353-2003
Vitreous and porcelain enamels--Corrosion tests in closed systems
GB/T 4956-2003
Non-magnetic coatings on magnetic substrates--Measurement of coating thickness--Magnetic method
GB/T 19354-2003
Vitreous and porcelain enamels for aluminium--Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)
GB/T 4957-2003
Non-conductive coatings on non-magnetic basis metals--Measurement of coating thickness--Eddy current
GB/T 9792-2003
Conversion coatings on metallic materials--Determination of coating mass per unit area--Gravimetric methods
GB/T 19355-2003
Protection against corrosion ofiron and steel in structures--Zinc and aluminum coatings--Guidelines
GB/T 19356-2003
Thermal spraying--Powders--Composition and technical supply conditions
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.