GB/T 11064.16-2013
AbolishedMethods for chemical analysis of lithium carbonate,lithium hydroxide monohydrate and lithium chloride - Part 16: Determination of calcium,magnesium,copper,lead,zinc,nickel,manganese,cadmium and aluminum content - Inductively coupled plasma atomic emission spectrometry
碳酸锂、单水氢氧化锂、氯化锂化学分析方法 第16部分：钙、镁、铜、铅、锌、镍、锰、镉、铝量的测定 电感耦合等离子体原子发射光谱法
Application Summary AI generated
This standard specifies the inductively coupled plasma atomic emission spectrometry (ICP-AES) method for simultaneously determining nine impurity elements (calcium, magnesium, copper, lead, zinc, nickel, manganese, cadmium, and aluminum) in lithium carbonate, lithium hydroxide monohydrate, and lithium chloride. It is applied in the metallurgical and battery materials industries for quality control and purity assessment of lithium compounds used in lithium-ion batteries, ceramics, and specialty chemicals. The method ensures precise multi-element analysis to verify that impurity levels meet specified limits for high-purity lithium salts.
Related Standards
GB/T 5153-2003
Designation and composition of wrought magnesium and magnesium alloys
GB/T 12690.13-2003
Chemical analysis methods for non-rareearth impurities of rare earth metals and their oxides--Determination of molybdenum and tungsten content--Induct-ively coupled plasma atomic emission spectrographic method and inductively coupled plasma mass spectrum
GB/T 12690.11-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of magnesium content--Flame atomic absorptionspectrometric method
GB/T 12690.4-2003
Chemical analysis methods for non-rare earth impurities ofrare earth metals and their oxides--Determination of oxygen and nitrogen content--Impulse-infrared and impulse-thermal conductance absorption method
GB/T 12690.10-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of phosphorus content by molybdenum blue spectrophotometric method
GB/T 12690.12-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of thorium content--Arsenazo III spectrophotometric method and inductively coupled plasma mass spectrum method
GB/T 12690.5-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of Al、Cr、Mn、Fe、Co、Ni、Cu、Zn、Pb content by inductively coupled plasma atomic emission spectrographic method--Determination of Co、Mn、Pb、N
GB/T 12690.6-2003
Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides--Determination of iron content--Kalium thiocyanate，1，10-phenanthroline spectrophotometric method
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.