GB/T 10051.10-2010
ActiveLifting hooks - Part 10: Hook nuts
起重吊钩 第10部分：吊钩螺母
Application Summary AI generated
This standard specifies the dimensions, technical requirements, and acceptance conditions for hook nuts used in lifting hooks. It is applied in the manufacturing and quality inspection of crane and hoist hook assemblies to ensure the secure fastening of hooks to their supporting structures. The standard is critical for material handling equipment in industrial settings, such as factories, warehouses, and construction sites, to prevent load disengagement during lifting operations.
Related Standards
GB/T 27696-2011
Forged steel eyebolts grade 4 for general lifting purposes
GB/T 19683-2005
Rail mounted transtainer
GB/T 18875-2002
Cranes--Spare parts manual
GB/T 18874.5-2002
Cranes--Information to be provided--Part 5:Overhead travelling cranes and portal bridge cranes
GB/T 18874.1-2002
Cranes--Information to be provided--Part 1:General
GB/T 18453-2001
Cranes--Maintenance manual--Part 1:General
GB/T 18439-2001
Harbour crane--General requirements for stability
GB/T 18438-2001
Harbour crane--Acceptance test rule
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.