GB 28377-2019

Active

Minimum allowable values of water efficiency and water efficiency grades for urinals

小便器水效限定值及水效等级

Standard Type
GB
ICS
91.140.70
CCS
Q31
Status
Active
Issue Date
2019-12-31
Implementation
2021-01-01
Centralized Committee
国家标准委
Issuing Authority
国家市场监督管理总局、中国国家标准化管理委员会

Application Summary AI generated

This standard specifies the minimum allowable values of water efficiency and the water efficiency grades for urinals, establishing mandatory limits on water consumption per flush. It is applied in China to classify urinals into grades (1 to 3) based on their water efficiency, guiding manufacturers, importers, and building contractors in product design, procurement, and compliance with national water conservation regulations. The standard is used in the construction and plumbing industry for all urinals sold or installed in China, including those in commercial, public, and residential buildings.

Related Standards

GB/T 19249-2003 Reverse osmosis water treatment equipment GB/T 16895.3-2004 Electrical installations of buildings--Part 5-54:Selection and erection of electrical equipment--Earthing arrangements，protective conductors and protective bonding conductors GB/T 7725-2004 Room air conditioners GB/T 16895.22-2004 Electrical instal lations of buildings--Part 5-53:Selection and erection of electrical equipment isolation，switching and control--Section 534:Devices for protection against overvoltages GB/Z 28598-2012 Study of the use of lifts for evacuation during an emergency GB/Z 28597-2012 Lifts and escalators subject to seismic conditions - Compilation report GB/Z 31822-2015 Study report on the safety requirements of public service escalators and moving walks GB/Z 35850.3-2021 Programmable electronic systems in safety-related applications for lifts (elevators), escalators and moving walks—Part 3: Life cycle guideline for programmable electronic systems related to PESSRAL and PESSRAE
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.