GB 25194-2010
ActiveSafety rules for the construction and installation of service lifts
杂物电梯制造与安装安全规范
Application Summary AI generated
This standard specifies safety requirements for the design, manufacture, and installation of service lifts (dumbwaiters) used exclusively for transporting goods, with a maximum car area of 1.0 m², rated load of 250 kg, and travel height of 12 m. It is applied in commercial buildings, hotels, restaurants, and hospitals where small lifts move items like food, laundry, or documents without passenger access. The standard ensures structural integrity, door interlocks, and electrical safety to prevent accidents during loading, operation, and maintenance.
Related Standards
GB/T 19249-2003
Reverse osmosis water treatment equipment
GB/T 16895.3-2004
Electrical installations of buildings--Part 5-54:Selection and erection of electrical equipment--Earthing arrangements，protective conductors and protective bonding conductors
GB/T 7725-2004
Room air conditioners
GB/T 16895.22-2004
Electrical instal lations of buildings--Part 5-53:Selection and erection of electrical equipment isolation，switching and control--Section 534:Devices for protection against overvoltages
GB/Z 28598-2012
Study of the use of lifts for evacuation during an emergency
GB/Z 28597-2012
Lifts and escalators subject to seismic conditions - Compilation report
GB/Z 31822-2015
Study report on the safety requirements of public service escalators and moving walks
GB/Z 35850.3-2021
Programmable electronic systems in safety-related applications for lifts (elevators), escalators and moving walks—Part 3: Life cycle guideline for programmable electronic systems related to PESSRAL and PESSRAE
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.