GB 24386-2009
ActiveGear grinding machines-Safeguarding specifications
磨齿机 安全防护技术条件
Catalogue
前言 → 1 范围 → 2 规范性引用文件 → 3 机床的危险 → 4 安全要求和措施与验证方法 → 5 使用信息 → 6 责任 Foreword → 1 Scope → 2 Normative References → 3 Hazards of the machine tool → 4 Safety requirements and measures and verification methods → 5 Information for use → 6 Responsibility
Scope
This standard specifies the technical requirements for the design, manufacture, use, and maintenance of safeguarding of gear grinding machines. This standard applies to gear grinding machines (hereinafter referred to as machines).
本标准规定了磨齿机安全防护的设计、制造、使用、维护等方面的技术要求。本标准适用于磨齿机（以下简称机床）。
Keywords
Application Summary AI generated
Manufacturers and designers of gear grinding machines use this standard to ensure their machines meet national safety requirements. Safety assessors and inspection bodies rely on this standard to verify the safety performance of gear grinding machines. This standard helps reduce accident risks during operation and protects operator safety.
磨齿机的制造商和设计人员使用本标准来确保机床在安全防护方面符合国家要求。安全评估人员和检验机构依据本标准对磨齿机进行安全性能验证。该标准有助于减少磨齿机操作中的事故风险，保护操作人员安全。
AI Summary AI generated
GB 24386-2009 'Gear grinding machines-Safeguarding specifications' specifies technical requirements for the design, manufacture, use, and maintenance of safeguarding for gear grinding machines. The standard covers hazard identification, safety requirements and measures, verification methods, and information for use. Some clauses are recommended while others are mandatory. It was proposed by China Machinery Industry Federation and is under the jurisdiction of SAC/TC 22. Main drafting units include Shaanxi Qinchuan Machinery Development Co., Ltd.
GB 24386-2009《磨齿机 安全防护技术条件》规定了磨齿机在设计、制造、使用和维护中的安全防护技术要求。标准涵盖机床危险识别、安全要求和措施、验证方法及使用信息。其中部分条款为推荐性，其余为强制性。该标准由中国机械工业联合会提出，由全国金属切削机床标准化技术委员会齿轮机床分技术委员会归口，主要起草单位包括陕西秦川机械发展股份有限公司等。
Key Sentences extracted from text
本标准的第3章,4.5.1f,4.7,4.9.1,.4.9.4,4.10(4.10.3.2除外),4.15,4.16.4.17 为推荐性的,其余为强制性的。
本标摧由中国机械工业联合会提出。
本标推由全国金属切削机床标璀化技术委员会齿轮机床分技术委员会(SAC/TC 22)归口。
本标雄起草单位:陕酋秦川机械发展股份有限公司 ,上海机床厂有限公司,上海第一机床厂。
本标谁为首欢发布。
Clause 3, 4.5.1f, 4.7, 4.9.1, 4.9.4, 4.10 (except 4.10.3.2), 4.15, 4.16, 4.17 of this standard are recommended, the rest are mandatory.
This standard was proposed by China Machinery Industry Federation.
This standard is under the jurisdiction of the Gear Machine Tool Subcommittee of National Metal Cutting Machine Tool Standardization Technical Committee (SAC/TC 22).
This standard was drafted by Shaanxi Qinchuan Machinery Development Co., Ltd., Shanghai Machine Tool Works Co., Ltd., Shanghai No.1 Machine Tool Plant.
This standard is first issued.