GB 17267-1998
AbolishedSafety specification for filling station of liquefied petrofeum gas
液化石油气充装站安全技术条件
Application Summary AI generated
This standard specifies safety technical requirements for the design, construction, and operation of liquefied petroleum gas (LPG) filling stations. It is applied in China to ensure the safe handling, storage, and transfer of LPG at facilities that fill cylinders or bulk containers for residential, commercial, and industrial use. The standard covers equipment layout, fire prevention, ventilation, and emergency response measures to mitigate risks of leaks, explosions, and fires.
Related Standards
GB/T 19249-2003
Reverse osmosis water treatment equipment
GB/T 16895.3-2004
Electrical installations of buildings--Part 5-54:Selection and erection of electrical equipment--Earthing arrangements，protective conductors and protective bonding conductors
GB/T 7725-2004
Room air conditioners
GB/T 16895.22-2004
Electrical instal lations of buildings--Part 5-53:Selection and erection of electrical equipment isolation，switching and control--Section 534:Devices for protection against overvoltages
GB/Z 28597-2012
Lifts and escalators subject to seismic conditions - Compilation report
GB/Z 28598-2012
Study of the use of lifts for evacuation during an emergency
GB/Z 31822-2015
Study report on the safety requirements of public service escalators and moving walks
GB/Z 35850.3-2021
Programmable electronic systems in safety-related applications for lifts (elevators), escalators and moving walks—Part 3: Life cycle guideline for programmable electronic systems related to PESSRAL and PESSRAE
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.