GB 16895.8-2000
AbolishedElectrical installations of buildings--Part 7:Requirements for special installations or locations--Section 706:Restrictive conducting locations
建筑物电气装置 第7部分:特殊装置或场所的要求 第706节:狭窄的可导电场所
Application Summary AI generated
This standard specifies safety requirements for electrical installations in restrictive conducting locations, such as metal tanks, boilers, or pipelines where a person's body can contact conductive surfaces. It is applied in industrial and construction settings to prevent electric shock hazards by limiting voltage, ensuring equipotential bonding, and requiring specific protective devices. The standard governs wiring and equipment selection in confined metallic environments where workers may be in direct contact with grounded conductive parts.
Related Standards
GB/T 19249-2003
Reverse osmosis water treatment equipment
GB/T 16895.3-2004
Electrical installations of buildings--Part 5-54:Selection and erection of electrical equipment--Earthing arrangements，protective conductors and protective bonding conductors
GB/T 7725-2004
Room air conditioners
GB/T 16895.22-2004
Electrical instal lations of buildings--Part 5-53:Selection and erection of electrical equipment isolation，switching and control--Section 534:Devices for protection against overvoltages
GB/Z 28597-2012
Lifts and escalators subject to seismic conditions - Compilation report
GB/Z 28598-2012
Study of the use of lifts for evacuation during an emergency
GB/Z 31822-2015
Study report on the safety requirements of public service escalators and moving walks
GB/Z 35850.3-2021
Programmable electronic systems in safety-related applications for lifts (elevators), escalators and moving walks—Part 3: Life cycle guideline for programmable electronic systems related to PESSRAL and PESSRAE
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.