GB 16895.27-2006
AbolishedElectrical installations of buildings - Part 7: Requirements for special installations or locations - Section 705: Electrical installations of agricultural and horticultural premises
建筑物电气装置 第7部分：特殊装置或场所的要求 第705节：农业和园艺设施的电气装置
Application Summary AI generated
This standard specifies safety requirements for electrical installations in agricultural and horticultural premises, covering wiring, equipment selection, and protection against external influences like moisture, dust, and animal contact. It is applied in the design, construction, and inspection of electrical systems in barns, greenhouses, stables, and other farming or horticultural facilities. The standard ensures reliable and safe operation of electrical installations in these special environments, reducing risks of fire, electric shock, and equipment damage.
Related Standards
GB/T 19249-2003
Reverse osmosis water treatment equipment
GB/T 16895.3-2004
Electrical installations of buildings--Part 5-54:Selection and erection of electrical equipment--Earthing arrangements，protective conductors and protective bonding conductors
GB/T 7725-2004
Room air conditioners
GB/T 16895.22-2004
Electrical instal lations of buildings--Part 5-53:Selection and erection of electrical equipment isolation，switching and control--Section 534:Devices for protection against overvoltages
GB/Z 28598-2012
Study of the use of lifts for evacuation during an emergency
GB/Z 28597-2012
Lifts and escalators subject to seismic conditions - Compilation report
GB/Z 31822-2015
Study report on the safety requirements of public service escalators and moving walks
GB/Z 35850.3-2021
Programmable electronic systems in safety-related applications for lifts (elevators), escalators and moving walks—Part 3: Life cycle guideline for programmable electronic systems related to PESSRAL and PESSRAE
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.