GB 16895.21-2004
AbolishedElectrical installations of buildings--Part 4-41:Protection for safety--Protection against electric shock
建筑物电气装置 第4-41部分:安全防护 电击防护
Application Summary AI generated
This standard specifies requirements for protection against electric shock in low-voltage electrical installations within buildings. It is applied by electrical engineers and contractors during the design, installation, and inspection of building wiring systems to ensure safety measures like automatic disconnection of supply or use of extra-low voltage are correctly implemented. The standard is primarily used in residential, commercial, and industrial building construction to prevent electric shock hazards.
Related Standards
GB/T 19249-2003
Reverse osmosis water treatment equipment
GB/T 16895.3-2004
Electrical installations of buildings--Part 5-54:Selection and erection of electrical equipment--Earthing arrangements，protective conductors and protective bonding conductors
GB/T 7725-2004
Room air conditioners
GB/T 16895.22-2004
Electrical instal lations of buildings--Part 5-53:Selection and erection of electrical equipment isolation，switching and control--Section 534:Devices for protection against overvoltages
GB/Z 28597-2012
Lifts and escalators subject to seismic conditions - Compilation report
GB/Z 28598-2012
Study of the use of lifts for evacuation during an emergency
GB/Z 31822-2015
Study report on the safety requirements of public service escalators and moving walks
GB/Z 35850.3-2021
Programmable electronic systems in safety-related applications for lifts (elevators), escalators and moving walks—Part 3: Life cycle guideline for programmable electronic systems related to PESSRAL and PESSRAE
Transparency note: The application summary and key sentences on this page were automatically generated by AI from the standard's original text. This content has not been human-verified and should not be used for compliance or regulatory purposes. Always refer to the official standard document from the issuing authority.