GB 16413-2009
ActiveInspecting specification of glass fiber reinforced plastic product safety property for coal mining
煤矿井下用玻璃钢制品安全性能检验规范
Catalogue
前言 → 1 范围 → 2 规范性引用文件 → 3 技术要求 → 4 试验方法 → 5 检验规则 Foreword → 1 Scope → 2 Normative References → 3 Technical Requirements → 4 Test Methods → 5 Inspection Rules
Scope
This standard specifies the inspection specification for safety property of glass fiber reinforced plastic products used in coal mining.
本标准规定了煤矿井下用玻璃钢制品安全性能的检验规范。
Keywords
Application Summary AI generated
Coal mine safety regulators and testing laboratories use this standard to inspect the safety performance of fiberglass products used underground. It ensures these products meet flame retardancy and other safety requirements to prevent fire hazards. This standard is critical for protecting miners' lives and ensuring safe coal mine operations.
煤矿安全监管部门和检测机构使用本标准来检验井下玻璃钢制品的安全性能。它确保产品在煤矿环境中具有足够的阻燃性和其他安全特性，防止火灾事故。该标准对保障矿工生命安全和煤矿安全生产至关重要。
AI Summary AI generated
This standard specifies the inspection specification for safety property of glass fiber reinforced plastic products used in coal mining, including technical requirements, test methods, and inspection rules. Chapter 3 is mandatory, while the rest are recommended. Compared with the 1996 version, it cancels terms and definitions, adds sampling base and quantity, and changes the flame retardancy index from sum to arithmetic mean. The standard applies to safety property inspection of fiberglass products in coal mines.
本标准规定了煤矿井下用玻璃钢制品安全性能的检验规范，包括技术要求、试验方法和检验规则。第3章为强制性条款，其余为推荐性。与1996版相比，取消了术语定义，增加了抽样基数和数量，并将阻燃性指标由总和改为算术平均值。标准适用于煤矿井下玻璃钢制品的安全性能检验。
Key Sentences extracted from text
本标准的第3章为强制性的,其余为推荐性的。
本标准代替 GB 16413-1996《煤矿井下用玻璃钢制品安全性能检验规范》。
取消了术语和定义(见1996 版的第 2章) ;
增加了抽样基数和抽样数量(本版的5.1.2.3) ;
阻燃性的指标由总和变为算术平均值(1996 版的 3.1;本版的 3.1);
Chapter 3 of this standard is mandatory, the rest are recommended.
This standard replaces GB 16413-1996 'Inspecting specification of glass fiber reinforced plastic product safety property for coal mining'.
Terms and definitions have been cancelled (see Chapter 2 of the 1996 edition);
Sampling base and sampling quantity have been added (5.1.2.3 of this edition);
The index of flame retardancy has been changed from sum to arithmetic mean (3.1 of the 1996 edition; 3.1 of this edition);
Standard Timeline
Changes from replaced version:
- 取消了术语和定义
- 增加了抽样基数和抽样数量
- 增加了检验项目表
- 阻燃性的指标由总和变为算术平均值
- 调整了阻燃性试验方法试件制备中的试件外观
- 调整了秒表精度
- Cancelled terms and definitions
- Added sampling base and sampling quantity
- Added inspection item table
- Changed flame retardancy index from sum to arithmetic mean
- Adjusted specimen appearance in flame retardancy test specimen preparation
- Adjusted stopwatch accuracy