Browse Standards

2436+ standards in database

2436 result(s) found

GB/T 3682.1-2018 Active

塑料 热塑性塑料熔体质量流动速率(MFR)和熔体体积流动速率(MVR)的测定 第1部分：标准方法

Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 1:Standard method

ICS: 83.080.20
2018-10-01
GB/T 36089-2018 Active

丙烯腈-丁二烯橡胶(NBR)

Acrylonitrile-butadiene rubber(NBR)

ICS: 83.060
2018-10-01
GB/T 1043.2-2018 Active

塑料 简支梁冲击性能的测定 第2部分：仪器化冲击试验

Plastics—Determination of charpy impact properties—Part 2:Instrumented impact test

ICS: 83.080.01
2018-10-01
GB/T 3682.2-2018 Active

塑料 热塑性塑料熔体质量流动速率（MFR）和熔体体积流动速率（MVR）的测定 第2部分：对时间-温度历史和（或）湿度敏感的材料的试验方法

Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 2: Method for materials sensitive to time-temperature history and/or moisture

ICS: 83.080.20
2018-10-01
GB/T 14837.3-2018 Active

橡胶和橡胶制品 热重分析法测定硫化胶和未硫化胶的成分 第3部分：抽提后的烃橡胶、卤化橡胶、聚硅氧烷类橡胶

Rubber and rubber products—Determination of the composition of vulcanizates and uncured compounds by thermogravimetry—Part 3:Hydrocarbon rubbers，halogenated rubbers and polysiloxane rubbers after extraction

ICS: 83.060
2018-10-01
GB/T 15904-2018 Active

橡胶 聚异戊二烯含量的测定

Rubber—Determination of polyisoprene content

ICS: 83.060
2018-10-01
GB/T 6111-2018 Active

流体输送用热塑性塑料管道系统 耐内压性能的测定

Thermoplastics piping systems for the conveyance of fluids—Determination of the resistance to internal pressure

ICS: 83.140.30
2018-10-01
GB/T 13663.2-2018 Active

给水用聚乙烯（PE）管道系统 第2部分：管材

Polyethylene(PE) piping systems for water supply—Part2: Pipes

ICS: 83.140.30
2018-10-01
GB/T 13663.5-2018 Active

给水用聚乙烯（PE）管道系统 第5部分：系统适用性

Polyethylene (PE) piping systems for water supply—Part 5: Fitness for purpose of the system

ICS: 83.140.30
2018-10-01
GB/T 13663.3-2018 Active

给水用聚乙烯（PE）管道系统 第3部分：管件

Polyethylene(PE)piping systems for water supply—Part 3: Fittings

ICS: 83.140.30
2018-10-01
GB/T 1452-2018 Active

夹层结构平拉强度试验方法

Test method for flatwise tension strength of sandwich constructions

ICS: 83.120
2019-02-01
GB/T 36214.5-2018 Active

塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第5部分：光散射法

Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part5:Method using light-scattering detection

ICS: 83.080.20
2018-12-01
GB/T 36214.4-2018 Active

塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第4部分：高温法

Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part4:High-temperature method

ICS: 83.080.20
2018-12-01
GB/T 36214.3-2018 Active

塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第3部分：低温法

Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 3:Low-temperature method

ICS: 83.080.20
2018-12-01
GB/T 36214.2-2018 Active

塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第2部分：普适校正法

Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 2:Universal calibration method

ICS: 83.080.20
2018-12-01
GB/T 36214.1-2018 Active

塑料 体积排除色谱法测定聚合物的平均分子量和分子量分布 第1部分：通则

Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 1:General principles

ICS: 83.080.20
2018-12-01
GB/T 36208-2018 Active

工业烟气排放系统防腐衬里技术要求及评价方法

Anticorrosion lining technical requirements and procedure evaluation for industrial exhaust gas systems

ICS: 83.140.99
2018-12-01
GB/T 18241.3-2018 Active

橡胶衬里 第3部分：浮选机衬里

Rubber lining—Part 3：Rubber lining for floatation machine

ICS: 83.140.99
2018-12-01
GB/T 36375-2018 Active

轨道交通 一系橡胶弹簧 通用技术条件

Railway transportation—Primary rubber spring suspension—General technical requirement

ICS: 83.140.99
2019-01-01
GB/T 36374.2-2018 Active

塑料 砜聚合物模塑和挤出材料 第2部分：试样制备和性能测定

Plastics—Sulfone polymer moulding and extrusion materials—Part2:Preparation of test specimens and determination of properties

ICS: 83.080.20
2019-01-01
Previous Page 72 of 122 Next